Mono 48v 390w 400w 410watt Premium Monocrystalline Thin Solar Panels

Sunnal mono half-cut single/double glass module,assembled with multi-busbar PERC technique and half-cut structure, which can not only absorb the energy from the front of the module, but also absorb the reflected light and the scattered light from the back，offer the advantages of higher power output,reduce shading effect on the energy generation,enhance the mechanical load bearing capacity as well.

product details

product description

详情 (1) Mono 48v 390w 400w 410watt Premium Monocrystalline Thin Solar Panelsps7

Multiple Busbars (MBB)

Densely distributed grid lines, uniform load,multi-busbars design. Output power increased by more than 5W.

Lossless cut: Lossless cutting technology, no mechanical damagesmooth cutting surface without burrs. Low cell cracking risks, micro-cracking is reduced by more than 50%.

Half-cut: Current density is reduced by 1/2 Internal power loss reduced to 1/4 of conventional modules. Rated output power increased by 5~10W.

New Welding Wire: Adopt round wire solder ribbon, low shading area. Multiple reflections of incident light, power increased by 1-2W.

Shading, not compromising energy: Up-down symmetrical parallel module design Effectively reduce current mismatch due to shading.

High-Density Encapsulation Technology: Adopts advanced high-density encapsulation technology to ensure the perfect balance of efficiency and reliability Module efficiency increased by more than 0.15%.

FEATURES

1.Pure sine wave solar inverter

2.Inverter running without battery

3.One-key restoration to factory settings

4.Built-in Lithium battery automatic activation

5.Bulit-in 120A MPPT solar controller

6.Max 6200W(for 4.2KW) & 6500W(for 6.2KW) solar charge

7.High PV input voltage range(60-450VDC)

8.Built in anti-dusk kit for harsh environment

9.Smart battery charge design to optimize battery life

10.Dual output

11.WIFI available for IOS and Android

详情 (2) Mono 48v 390w 400w 410watt Premium Monocrystalline Thin Solar Panelsfh5

Product Parameters

Module Number: ANM	395	400	405	410	415
Maximum Power Pmax (W)	395W	400W	405W	410W	415W
Open circuit voltage·Voc (V)	45.3V	45.5V	45.7V	45.8V	45.9V
Short circuit current Isc (A)	13.79A	13.86 A	13.92A	13.99A	14.04A
Voltage at Maximum Power Vmp (V)	38.0V	38.2V	38.3V	38.5V	38.7V
Current at Maximum Power Imp (A)	12.89A	12.97A	13.05A	13.12A	13.18A
Module efficiency-n (%)	20.60%	20.80%	21.10%	21.30%	21.70%
Power Tolerance	0~+3%	0~+3%	0~+3%	0~+3%	0~+3%
STC: Irradiance 1000W/m², Module Temperature 25°c, Air Mass 1.5
Mechanical Parameters
Monocrystalline PERC		Monocrystalline PERC 182x182mm
Dimension		1730x1134x35mm
Glass		3.2mm, High Transmission, Low Iron, Tempered Glass
Junction Box		IP65&IP67 Rated
Output Cable		Section Size: 4mm² , Length: 900mm
Frame		Anodized Aluminum Alloy
No. of Bypass Diodes		6
Connector		MC4 Compatible
Working Conditions
Maximum System Voltage
Operating Temperature		-40°c~+85°c
Maximum Series Fuse		15A
NOCT		45±2°c
Application Class		Class A
Temperature Coefficient
Temperature Coefficient of Pmax		-0.39%/°c
Temperature Coefficient of Voc		-0.29%/°c